Re: iSCSI storage unusable for a host - iSCSI Adapter interface path status...
Drop down to shell on that esxi host an do a vmkping from your iSCSI port to the array. Does that succeed?
View ArticleVMware ESXi 6.7: Cannot Download Kickstart Config File After iPXE Boot
Hello all -- We have sucessfully gotten the VMware ESXi 6.7 installer to boot from a HTTP server using iPXE (and automatically enable the serial console), but we are running into problems getting the...
View ArticleRe: iSCSI storage unusable for a host - iSCSI Adapter interface path status...
awesome - i'll get someone to do that and let u know
View ArticleRe: iSCSI storage unusable for a host - iSCSI Adapter interface path status...
Remove your iSCSI target from the adapter, rescan, and reboot the ESXi host. Then try again.
View ArticleRe: iSCSI storage unusable for a host - iSCSI Adapter interface path status...
check on your storage end (LUN/Disk) should be connected on that host.
View ArticleRe: iSCSI storage unusable for a host - iSCSI Adapter interface path status...
hey there and thx so much for helping! So here's what I've tried... I've tried removing the iSCSI target from the adapter - removed the vswitch and vmk's and rebooted... and that didn't change it....
View ArticleRe: iSCSI storage unusable for a host - iSCSI Adapter interface path status...
This would be much easier if I can see. Would you take some screenshots of your vswitch, vmkernels, and iSCSI soft adapter, please?
View ArticleRe: Windows Server 2012 R2 BSOD 0x0000013c
I ended up paying for single-incident support for Microsoft Windows and this was the end result that closed the case: Symptom: 2012 R2 server named "XXXXXXXXX" is presenting the BSOD 0x0000013c...
View ArticleRe: VMware ESXi 6.7: Cannot Download Kickstart Config File After iPXE Boot
All -- We discovered the cause of this error message after much investigation. The issue was that the host was being assigned an IP address in a /31 subnet by the DHCP server, and ESXi is apparently...
View ArticleClik here to view.
Re: VMware ESXi 6.7: Cannot Download Kickstart Config File After iPXE Boot
You have no problems, do you have problems exporting as vm with version 6.7 or not? the question has nothing to do with the above problem, just a question of mine
View Articleconnect esxi 6.7 via VMware vSphere Client
hi I want to connect esxi 6.7 with "VMware vSphere Client" not with browser thanks in advance
View ArticleRe: connect esxi 6.7 via VMware vSphere Client
hi,Starting vSphere 6.5 and later, the C# client will not be available.VMware Knowledge Base
View ArticleUnable to connect to my ESXI host static ip
Hi all, so I have ESXi installed on a PC and it is connected by ethernet to my router. I assigned the ESXi host a static ip (192.168.1.22), subnet is 255.255.255.0, default gateway is 0.0.0.0. To set...
View ArticleRe: Unable to connect to my ESXI host static ip
What network is the PC in from which you're trying to connect to the ESXi host?
View ArticleRe: Unable to connect to my ESXI host static ip
Is your Esxi Host on PC and your laptop connected to same gateway ? I think you should assign gateway 192.168.1.1 instead of 0.0.0.0 and once your Esxi host and laptop are on same network connected...
View ArticleClik here to view.
Slower disk read rate after upgrading hardware to VM Version 11
Hi, We have recently upgraded our VSphere from 5.5 to 6.5 and migrated all the VMs. I noticed after upgrading vm hardware to version 11 or above we get slower disk read rate on all the VMs. As a test I...
View ArticleRe: Slower disk read rate after upgrading hardware to VM Version 11
1. We need a comprehensive analysis.Where is the bottleneck.See all the metrics.Is the depth of the queue sufficient?Not be limited to one program (iometer).And first of all I would like to know how a...
View ArticleRe: Slower disk read rate after upgrading hardware to VM Version 11
I can't find the bottleneck. Storage adaptor is LSI Logic SAS and datastore is version 6 in both hardware version 9 and 11.Vmware tools was also updated.OS is 2012 R2.Both tests were done on a same VM....
View ArticleRe: Slower disk read rate after upgrading hardware to VM Version 11
It will be logical to replace the LSI Logic SAS controller with the Paravirtual controller and run the test.How to change the storage adapter to Paravirtual (PVSCSI) for a Windows guest | VMwarebits.com
View Article