Re: Location of "Events" seen in vSphere connected to ESXi 4.1 host?
Anjani_Kumar wrote: There are multiple kind of log files in the esxi host .I know, but I'm only interested in the "Events" tab events as I specifically wrote it out. /var/log/messages – combination of...
View ArticleRe: This virtual machine failed to become vSphere HA Protected and HA may not...
VMware manual says: "Not enough resources for a fail over. HA may not vMotion the virtual machine to another host. Upgrade the hardware on the hosts or add more hosts to the cluster."
View ArticleClik here to view.
Re: Location of "Events" seen in vSphere connected to ESXi 4.1 host?
gallycool wrote: Hello , Please check in the below location. /var/run/log This is the location where the old logs are stored. If the scratch partition is set to temp location then the logs will be...
View ArticleClik here to view.
need some advice on ESXi without vSphere
I have about 30 physical server (about 5 are to be decommissioned) running server 2008. There's one server that is running MS Hyper-V 2012 R2. I am running into compatibility issues here and there. For...
View ArticleRe: SCP not working on ESXi 4.1
Ok, - Please try a telnet to your problem host and to the other running in port 22 - there is a network firewall in this environment?
View ArticleRe: SCP not working on ESXi 4.1
WinSCP from a current download will fail on ESXi 4.1 - maybe trying older versions of WinSCP helps.Anyway - it is not a firewall problem.
View Articlemoving to vmxnet3 or stay on e1000 - only 1GB nics to server
We have an environment that only has 1GB nics on the vm vswitch. any advantage of moving from e1000 to vmxnet3 at all?
View ArticleClik here to view.
Re: moving to vmxnet3 or stay on e1000 - only 1GB nics to server
Yes, vmxnet3 offers benefits even if your uplinks is 1GbE, since for example vmxnet3 make a better use of CPU cycles, take a look here: http://www.vmware.com/pdf/vsp_4_vmxnet3_perf.pdf Figure 5 shows...
View ArticleClik here to view.
Re: moving to vmxnet3 or stay on e1000 - only 1GB nics to server
Yes vmxnet3 has significant performance advantage over E1000, the only reason why e1000 is the default nic is because vmxnet3 requires vmware tools to be installed
View ArticleA quiesced snapshot could not be created for the virtual machine...
Hello Gents, I can't backup only this Vm with Backup Exec 2014 since a very long time. They are no snapshot existed in snapshot Manager. Could you help me ? A quiesced snapshot could not be created for...
View ArticleRe: A quiesced snapshot could not be created for the virtual machine...
Do you have any snapshot disk in VM datastore?If yes you need to contact with your backup support to consolidate the disk.As temp fix you can run a backup without quiesced point,i believe we can set a...
View ArticleClik here to view.
Re: A quiesced snapshot could not be created for the virtual machine...
No i don't. it was before , i have clone it with another name. And now it is very light with no snaphot. I see this technote, and a lot of others .. but with no answers .. That is strange when i...
View ArticleRe: Call "HostDatastoreSystem.CreateVmfsDatastore" for object...
Hi, I just had the same issue and it was fixed by fixing an issue with the MTU packet size. Jumbo frames were enabled on the storage, iSCSI vmkernel ports and iSCSI standard switch but there were...
View ArticleRe: How to reset HP Proliant memory sensor?
This worked for me too! Unfortuanately, I called HP and we went thru a lot of hardware (repaced a cpu and a system board) before I found this post, but I am very thankful for this solution. Thank you...
View ArticleClik here to view.
Re: A quiesced snapshot could not be created for the virtual machine...
Hello,I have found the solution.I have disabled GRT in the JOB BE. and the host where the VM belong was not the good time. No Ntp server was configured.I did and now it's works. I think that the...
View ArticleClik here to view.
Re: How to install windows 8 on esxi 4.1 ?
I just wanted to drop a line and mention that jmattson's instructions worked perfectly for me. I installed a Windows 8.1 VM on ESXi 4.1. VMware Tools were installed easily as well. I just did a custom...
View ArticleClik here to view.
chkdsk (windows 2003 sbs) after reboot (esxi 4.1.0, 260247)
Hello, we restartet a windows 2003 SBS server (via windows start menue) because of strange behavior. (mailsystem wasn´t working well)I didn´t find error message in the windows system event log.We saw...
View ArticleClik here to view.
Re: chkdsk (windows 2003 sbs) after reboot (esxi 4.1.0, 260247)
Info: I have this erros in app event log: Ereignistyp: WarnungEreignisquelle: PerfDiskEreigniskategorie: KeineEreigniskennung: 2001Datum: 17.07.2015Zeit: 07:44:49Benutzer: Nicht zutreffendComputer:...
View ArticleRe: Datastore1 becomes inactive
Same issues here, but vmnics start to go down/up/down/up/etc. just shortly after the ahci reset. I'm running NSX and dvSwitches.
View ArticleClik here to view.
Re: Datastore1 becomes inactive
Did you check for the any Harddrive failure? RAID issues ? if it goes in active check the kernel and Device latency . since it is on Local storage i am sure it should be with disk problems .
View Article