ESX unable to Ping Host - Very weird issue.....
Hi, I have one issue still no resolve until now. Kindly please assist me if you have this issue before or similar issue. The issue like this....1 vm having issue not pingable from ESX Host. After...
View ArticleRe: ESX unable to Ping Host - Very weird issue.....
The potential causes of problems here is large, so we need a little more info to help you out. 1. Is the VMs connected to a dvswitch?2. Have you tested the vlan/network used with another vm?3. Have you...
View ArticleRe: ESX unable to Ping Host - Very weird issue.....
Hi Hawkie Man, Below is the answer 1. Is the VMs connected to a dvswitch?Yes2. Have you tested the vlan/network used with another vm?Yes, another VM on the same VLan not issue.3. Have you tried...
View ArticleRe: ESX unable to Ping Host - Very weird issue.....
May i suggest a little test. Remove the current virtual NIC, then add a new NIC and configure it up. Also make sure vmware tools is properly installed.May I ask what OS the vm is running? Did it work...
View ArticleRe: ESX unable to Ping Host - Very weird issue.....
Hi Hawkerman, Thank you for give suggestion. Will proceed to do when it come to time this vm is "wake up" again. Currently now, she is "sleeping" meaning this vm is currently not down from our...
View ArticleRe: High %lat_c CPU Latency for 1 VM
Good analysis. There is some discussion internally in VMware. Let me digest those. I will also ask Ravi Soundararajan on this. Hopefully he knows whom to ask this.Bumping up this thread in the mean...
View ArticleRe: High %lat_c CPU Latency for 1 VM
Hi vNEXThe main issue is here is the vmx has high %LAT_C while the vmx-vcpu does not. This means the Guest OS does not use the CPU, but perhaps the VMM layer. Based on the KB1019471, it should not be...
View Articlevlans configuration problem
Hi all, I have an IBM Blade Chassis H with 2 BNT Layer 2/3 Copper Gigabit Ethernet Switch Modules firmware 5.3.0.5. Each switch is connected to one upstream switch using two trunks with two external...
View ArticleRe: ESX unable to Ping Host - Very weird issue.....
You dont need to shutdown to add a new nic. Just add it the it will appear, then prepare ip address setup and when ready to push apply, you remove old nic and then apply. Second question, reinstall...
View ArticlevCenter 5.1 re-add hosts fail
Hi all, Ok....for whatever reason today all hell broke loose on my VMWare Cluster.vCenter 5.13 Hosts connected, at least they were on Friday (HP Gen8 DL380p, 2 x Xeon, 128Gb Mem) Today I come in and...
View ArticleRe: ESX unable to Ping Host - Very weird issue.....
Hmmm....I will perform to add new NIC card to this Virtual Machine and will share with you soon.
View ArticleEsx 4.1 on drive flash usb, hang randoms
hello,My Esx 4.1 installs on usb flash drive and keeps crashing, not daily but with a week beween each crashmy hardware: HP Proliant DL380p gen8 Sep 8 12:27:03 vmkernel: 105:20:41:56.977...
View ArticleRe: High %lat_c CPU Latency for 1 VM
GalNeb David, thanks for reaching via email. Hope you are okay with the answer. As a summary for everyone here, I posted the question internally and got the advice that "The CPU usage of a vmx world...
View ArticleRe: How to install windows 8 on esxi 4.1 ?
Hello everyone, I know this is an old post, thanks a lot! the bios trick worked great :-) moonshine560 I've also tried your suggestion, at first glance worked, installed the missing system driver and...
View ArticleClik here to view.
Anomalia risorse lama esxi
Buongiorno, ho un problema con una lama di un blade.Utilizzo Vmware esxi 4.Nonostante le macchine virtuali siano accese e completamente operative, le risorse utilizzate sulla lama restano a zero, sia...
View ArticleRaid 6 Partially Degraded
Hi, I have esxi 4.1 running on a Dell PE R715. I recently had a HD fail, and when I replaced the HD with a new one it rebuild automatically (and pretty quick too about 6 hours). Then I just had a HD...
View ArticleRe: Vsphere Client 4.1.0, I Can't customize charts.
It is possible to turn it on in in ESXi. Have a look at this excellent guidehttp://www.vm-help.com/esx/esx3i/extending_performance_data.php
View ArticleAdvice needed on disabling synchronous consolidation
Virtual machines might stop responding during a snapshot removal due to a forced synchronous consolidation between the snapshot disk and the parent disk. This occurs when the virtual machine is running...
View ArticleError msg : Virtual Machine has 8 virtual CPUs, but the Host only supports 4....
I have running vSphere 4.1 EE + allocated to 5 ESXi Servers. The VM is on a Dell 2950 that has 2 sockets, with 4 cores per socket, and 8 logical processors I am trying to move the VM that is powered...
View Article