Re: move VM using ovftool
I had this same problem. Here is the command that worked between a 5.5 host (under a different venter) directly to our VCSAppliance running 6.5u1. ovftool.exe -ds=vsanDatastore...
View ArticleRe: Need script to fetch esxi 6.0/6.5 hardware information
try this https://www.vmspot.com/collecting-esxi-host-hardware-information-with-powershell/ Thanks,MS
View ArticleRe: Need script to fetch esxi 6.0/6.5 hardware information
you can use below as wellAudit and Manage ESXi Hosts with PowerCLI - VMware PowerCLI Blog - VMware Blogs
View ArticleRe: install ESXi, stop on "Relocating modules and starting up the kernel"
I had to try several times until I got it working: THIS IS A GUIDE TO INSTALL ESXI ON THE SAME USB-STICK THAT CONTAINS THE INSTALLER ON AN INTEL NUC5PPYH 1.) BIOS: reset to default ! and DISABLE UEFI...
View ArticleRe: HPE BL460c Gen9 - SD-CARD -...
I ran into this exact issue on Dell FC630's in a FX2 enclosure. Long story short, I had to reseat the blade (gave it like 5 minutes to drain residual power). Long Story here:Zsoldier's Tech Blog:...
View ArticleClik here to view.
Run Script for monitor_control.enable_softResetClearTSC only for a Specific...
This is the script found here: VMware Knowledge Base I want to execute this without running on ALL VMs. How would i add a " Get-Content $ChangeMonitorcontrol | ForEach-Object " to the script below...
View ArticleRe: Hyper-V 2 VMware keep mac address
Hello a.p. Sorry for the late reply on your latest helpfull information, since i'm working with production servers I have to plan the migration and that will take some time. :-) At this moment I'm...
View ArticleRe: Install ESXi 6.5 on R730 with Intel X710
I'm currently experiencing similiar problems with HPE branded cards (562SFP+).Log entries show the following:2018-03-02T11:15:56.116Z cpu12:66212)i40en: i40en_HandleMddEvent:6969: Malicious Driver...
View ArticleESXi 5.5 SSH problems
HiI have an issue with a ESXi 5.5 Host.From vSphere looking into the settings, SSH access should be enabled. However when trying to SSH from PuTTy or Bitvise. Error message from Bitvise:The SSH2...
View ArticleRe: ESXi pci passthrough device limits
I have no explanation to what has gone wrong or how it got "fixed".Basically I just rebooted the host this morning, allowed for all the VMs to power on and initialize, as usual and then start the 4th...
View ArticleRe: 600ms read latency on ESXi6.0 on Dell R510
I don't have any proof that odd vCPU count can be problematic. But I look at computers as binary entities and numbers that are powers of 2 or at least even is preferred (the exception being 1 which is...
View ArticleRe: ESXi 5.5 SSH problems
You may have an issue with your client or networking problem. Try from another client and workstation.
View ArticleRe: NIC speed 100mbps instead of 1000mbps
I totally agree with Jimmy, this is not the first time this question a has arisen. As he stated, the slowest link in the chain, that covers it, at least in part since all hardware in the system needs...
View ArticleRe: 600ms read latency on ESXi6.0 on Dell R510
Those are very common messages. Anytime the latency jumps 20x that alert is generated. It includes latency from the kernel all the way to storage. So if there's any latency at the kernel or network...
View ArticleRe: Run Script for monitor_control.enable_softResetClearTSC only for a...
any ideas on this anyone?
View ArticleRe: esxcli comand Connect to localhost failed: Connection failure via host...
Try below cmds to check/start hostd service /etc/init.d/hostd status >>>> /etc/init.d/hostd start Check hostd status , if it's not started then check /var/log/vmkernel.log ,...
View ArticleRe: ESXi 5.1 - Connect to localhost failed: Connection failure
Try below cmds to check/start hostd service /etc/init.d/hostd status >>>> /etc/init.d/hostd start Check hostd status , if it's not started then check /var/log/vmkernel.log ,...
View ArticleRe: Failed: H:0x0 D:0x2 P:0x0 Valid sense data
Check below KBs to understand SCSI Check Conditions in VMkernel logs VMware Knowledge BaseVMware Knowledge Base TypeCodeNameDescriptionHost Status[0x0]OKThis status is returned when there is no error...
View ArticleRe: ESXi 6.5u1 \ bug \ Swap-files \ edit VM
First thing I'd recommend doing to see what gets resolved is to update the ESXi embedded host client with the latest from the Fling site.
View Article