Re: ESXi Datastore Extent ID Changed - Old Offline
Hi, Is there any data in datastore2? If no I would recommend to delete the logical disks (main disk + extent) which back this datastore from RAID controller and recreate it.Its good to create a single...
View ArticleRe: ESXi Datastore Extent ID Changed - Old Offline
Hello! Thank you for the response! Unfortunately yes there is data on the store o i cant really just blank it and start again (although I agree that would be ideal!) VMWare technical support advised I...
View ArticleRe: ESXi Datastore Extent ID Changed - Old Offline
ok, give a try with the steps in following wiki. Be extra caution when you play with partedutl. Recreating a missing VMFS datastore partition in VMware vSphere 5.0/5.1/5.5 (2046610) | VMware KB
View ArticleRaid 0 to 1
Hello, I have a little problem. When installing a new server (ML350 G8) the Raid was created in Raid 0 with 2 disks of 146gb. The esxi has been installed on this Raid 0 and I would like to know if I...
View ArticleRe: Corrupt virtual disks
try removing the VM from and re-register it. Here are the steps. https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006160
View ArticleRe: Windows Server 2012 R2 Bad Performance
Hello Adam, just wanted to know if you already have any new information, or did some new tests which might be helpful? Regards Peter
View ArticleRe: ESXi 6.5 connectivity issue on PowerEdge R430
Hi, I have the same issue, using the latest ntg3 driver on Dell R630 with Broadcom BCM5719 for iSCSI traffic (MTU 9000).Support Request #17474802805 is created, but some information if you want....
View ArticleRe: Raid 0 to 1
Hi, I hope the datastore is on RAID 5 volume and RAID0 has only the ESXi installation. If so you can do this, From RAID controller firmware, delete RAID0 and build RAID1 with 2x146Gb. Note: this will...
View ArticleRe: Onverwachte poweroff machine: Panic error
HI, Thanks for taking the time to translate and respond, I thought this would be a dutch only forum as everything is displayed in that language for me.Anyway we implemented the workaround on the...
View ArticleRe: Virtual Machines screen blank after upgrade to 6.5.0b (HPE version)
Thanks André. I checked today and it does appear to display properly now, so guessing the browser cache was the issue as you suggested. Many thanks
View ArticleClik here to view.
Re: vSphere Web Client SUCKs so bad that my experience managing and...
Ok, next question. I have CPU usage for VM in three different places. All of them are showing different reading. Which one is correct? E: Four locations...
View ArticleClik here to view.
Re: vSphere Web Client SUCKs so bad that my experience managing and...
Thanks found it! (6.5).And thanks for the gui team for hiding it! Any change, the same options would be listed here with the open console than in the "gear" button ?The next rant would be "Unable to...
View ArticleRe: remote syslog esxi6.5.0d apparently not working?
I have seen this behavior if the entry for the settings is not correct. The format of the entry is explained in VMware vSphere 6.5 Documentation LibraryAlso if you are using a hostname or FQDN, make...
View ArticleUnable to backup Windows AD Server with VMware Tools installed
Hi Folks We have some Windows Server 2012 R2 VMs running in DMZ environment. An easy way to backup them is using the integrated Windows Server backup functionality. We recently updated our VMware Tools...
View ArticleClik here to view.
Help using a NVIDIA Quadro M5000 with ESXi 5.1
Hi, I`ve readed a lot of material about that since yesterday.My scenario is the following:Server: HP ProLiant ML350 Gen9Graphic card:NVIDIA Quadro M5000vSphere version:5.1.0 build 2323236 Downloaded...
View ArticleRe: Cannot add new datastore
For testing - try a very small HDD & check if you see the full size - If Yes! then, I would recommend checking (1) BIOS, (2) RAID controller generation (3) HDD's are all at their most recent...
View ArticleRe: Purple Screen on Cisco UCS server with ESXi 6.5 Build 5146846 (March 9,...
Yes, Cisco has published the 6.5d custom ISO. For HPE, you can use their latest custom ISO and simply use Update Manager to apply the latest ESXi patches. Then, when HPE releases their custom ISO,...
View ArticleRe: Purple Screen on Cisco UCS server with ESXi 6.5 Build 5146846 (March 9,...
That's what i have done. Just after upgrade of ESXi to 6.5 i have pushed all the patches including those ones that are in HPE Software Delivery Repository vibsdepot (aka HPE Online Depot) .I have 3...
View ArticleFailed to register the device pciPassthru0 for x:x.x due to unavailable...
Hi,What is the root cause of the below issue:Failed to register the device pciPassthru0 for x:x.x due to unavailable hardware or software support. We have Sun x4-8 server that the server had 768 GB...
View ArticleRe: Corrupt virtual disks
Hi Yezdi. I tried but not work ): Do you know how I recovery the information found in the vmdk? Regards
View Article