Re: Do we need the SLP Service on Port 427
any further information from VMware on this?
View ArticleMy esxi servers try to connect by ONC-RPC to old files server (alredy removed)
HiI can see on my firewall ONC-RPC session end with timeout.I didn't find any place that the old server is use.Any ideas?
View ArticleRe: My esxi servers try to connect by ONC-RPC to old files server (alredy...
Really need more info here. Only possibility may be attempting to mount an NFS server.
View ArticleClik here to view.
Monitor Hardware, system sensors missing ESXI 6.7
Hello, We have 3 Dell R440 servers running ESXI 6.7, two servers display normal system sensors values. On one though it only show CPU temp, and the value displayed is -128c. I have tried many things I...
View ArticleRe: My esxi servers try to connect by ONC-RPC to old files server (alredy...
I didn't find any NFS related to this server.I find out that I didn't remove the VM replication (by Veeam) from my DR...I remove it and see if this is the reason.
View ArticleRe: Monitor Hardware, system sensors missing ESXI 6.7
Do you have Dell OpenManage installed? Check out the logs over there and see what values are displayed for CPU in OpenManage.
View ArticleRe: Monitor Hardware, system sensors missing ESXI 6.7
Hello, No unfortunately I dont have OpenManage installed. But I tried to check in system bios Lifecycle control, and there I can see the CPU temp.
View ArticleClik here to view.
VMware ESXi 6.0.0 error
Hello I have tried to install VMware ESXi 6.0.0 on HPE proliant DL120 Gen9 and it give me with this error " error : file:///Ks.cfg:line 3: install --firstdisk specified, but no suitable disk was...
View ArticleRe: VMware ESXi 6.0.0 error
What is your installation disk? Did you specify a locally configured array or a something like a USB drive or SD Memory?!
View ArticleRe: Monitor Hardware, system sensors missing ESXI 6.7
Configure iDRAC port on that server and check the detail log files about the CPU and also what's going on in your server ...
View ArticleClik here to view.
Re: Monitor Hardware, system sensors missing ESXI 6.7
We are not the end user, and we have specific setups/configurations that we ship. This is the first time we had this problem. So to configure IDRAC port and everything is not really a option. One thing...
View ArticleRe: VMware ESXi 6.0.0 error
Hello, looks like your local disk isn't being discovered.On which drive are you trying to install? SD card, USB or some other Local Disk?
View ArticleRe: VMware ESXi 6.0.0 error
On the server bios you can see the local drive?Are you using the ESXi HPE custom image for the installation? or the standard one from the VMware site?
View ArticleRe: ESXi - esxtop shows high %RDY value fo service "system"
ValentinStill why the CPU ready for 'system' is high. Does it impact performance of ESXi host. I have seen a case where we have only 2 VM running on an ESXi host. VM Utilization is low, still I see...
View ArticleRe: VMware ESXi 6.0.0 error
Is the interruption happened while the duration of the installation progress or after the first boot? if it's happened in the loading progress, you can bring the shell and try the following command to...
View ArticleDoes ESXi support VROC
I have an Intel server with 4 NVMe in a RAID 10 using VROC. When I load into VMWare ESXi and try to create a datastore, the drives are all listed separately, without my VMD. Are there drivers I need to...
View ArticleRe: Does ESXi support VROC
No, that's a form of "fake" RAID which ESXi does not and will not ever support. It should absolutely be avoided in an ESXi configuration.
View ArticleESXi 6.0 host - Some VMs go offline intermittently
Recently, like some of you, I've been going through the process of upgrading/migrating my services from Server 2008 to Server 2012-->2016. I also recently upgraded our ESX host to version 6.0, and...
View Article