Check this out.

NUMA Deep Dive Part 5: ESXi VMkernel NUMA Constructs - frankdenneman.nl

If you found this or any other answer helpful, please consider the use of the Correct or Helpful to award points.

Best Regards,

Deepak Koshal

CNE|CLA|CWMA|VCP4|VCP5|CCAH

https://in.linkedin.com/in/dkoshal

Hi same here with a OMNIKEY 3021 - esxi 6.5

In the lsusb I see it as omnikey 3121 when try to connect to a ubuntu 17.04 or a debian vm machine, booting it disappear from the connected hardware. On the datastore monitor it seems disconnected

any help?

Really thanks in advance

PS already disabled the new vmkusb module

vobd.log

2017-07-18T04:42:55.080Z: An event (esx.audit.shell.enabled) could not be sent immediately to hostd; queueing for retry.

2017-07-18T04:43:35.110Z: [GenericCorrelator] 125231229us: [vob.user.host.boot] Host has booted.

2017-07-18T04:43:35.110Z: [UserLevelCorrelator] 125231229us: [vob.user.host.boot] Host has booted.

2017-07-18T04:43:35.110Z: [UserLevelCorrelator] 125231613us: [esx.audit.host.boot] Host has booted.

vmkernel.log

2017-07-17T17:30:54.327Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:54.327Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:54.439Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:54.439Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:54.551Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:54.551Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:54.663Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:54.663Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:54.775Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:54.775Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:54.887Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:54.887Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:54.999Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:54.999Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.111Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.111Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.223Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.223Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.335Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.335Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.447Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.447Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.559Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.559Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.671Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.671Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.783Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.783Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:30:55.895Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:30:55.895Z cpu23:3033759)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:31:26.791Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt virt reset for device: vmhba1:C2:T0:L0

2017-07-17T17:31:26.791Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:564: VIRT_RESET cmd # 330974832

2017-07-17T17:31:26.791Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:565: Virtual Reset not implemented, calling fusion reset

2017-07-17T17:31:26.791Z cpu65:65988)lsi_mr3: fusionWaitForOutstanding:2943: megasas: [0]waiting for 0 commands to complete

2017-07-17T17:31:29.793Z cpu23:3033759)WARNING: VSCSI: 3488: handle 8258(vscsi0:0):WaitForCIF: Issuing reset;  number of CIF:33

2017-07-17T17:31:29.793Z cpu23:3033759)WARNING: VSCSI: 2645: handle 8258(vscsi0:0):Ignoring double reset

2017-07-17T17:31:33.594Z cpu41:2508812)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:31:33.594Z cpu41:2508812)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:31:57.465Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt virt reset for device: vmhba1:C2:T0:L0

2017-07-17T17:31:57.465Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:564: VIRT_RESET cmd # 330975350

2017-07-17T17:31:57.465Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:565: Virtual Reset not implemented, calling fusion reset

2017-07-17T17:31:57.465Z cpu65:65988)lsi_mr3: fusionWaitForOutstanding:2943: megasas: [0]waiting for 0 commands to complete

2017-07-17T17:32:04.646Z cpu58:2508812)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:32:04.646Z cpu58:2508812)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:32:27.467Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt virt reset for device: vmhba1:C2:T0:L0

2017-07-17T17:32:27.467Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:564: VIRT_RESET cmd # 330975591

2017-07-17T17:32:27.467Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:565: Virtual Reset not implemented, calling fusion reset

2017-07-17T17:32:27.467Z cpu65:65988)lsi_mr3: fusionWaitForOutstanding:2943: megasas: [0]waiting for 0 commands to complete

2017-07-17T17:32:35.618Z cpu50:2508812)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:32:35.618Z cpu50:2508812)lsi_mr3: mfi_TaskMgmt:574: ABORT

2017-07-17T17:32:58.464Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt virt reset for device: vmhba1:C2:T0:L0

2017-07-17T17:32:58.464Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:564: VIRT_RESET cmd # 330976073

2017-07-17T17:32:58.464Z cpu65:65988)lsi_mr3: mfi_TaskMgmt:565: Virtual Reset not implemented, calling fusion reset

2017-07-17T17:32:58.464Z cpu65:65988)lsi_mr3: fusionWaitForOutstanding:2943: megasas: [0]waiting for 0 commands to complete

2017-07-17T17:33:06.586Z cpu44:2508812)lsi_mr3: mfi_TaskMgmt:560: Processing taskMgmt abort for device: vmhba1:C2:T0:L0

2017-07-17T17:33:06.586Z cpu44:2508812)lsi_mr3: mfi_TaskMgmt:574: ABORT

you are using lsi_mr3 to connect to local storage

HBA Name  Driver   Link State  UID                   Capabilities  Description

------------------------------------------------------------------------------

vmhba0    lsi_mr3  link-n/a    sas.500605b00c818660                (0000:06:00.0) Avago (LSI) MegaRAID SAS Invader Controller

vmhba1    lsi_mr3  link-n/a    sas.500605b00cb1a1d0                (0000:10:00.0) Avago (LSI) MegaRAID SAS Invader Controller

vmhba32   vmkusb   link-n/a    usb.vmhba32                         () USB

can you check the driver and firmware for the lsi_mr3 for the storage by following the kb and compare with vmware compatibility list

Determining Network/Storage firmware and driver version in ESXi 4.x and later (1027206) | VMware KB

Name                           Version                              Vendor  Acceptance Level  Install Date

----------------------------------------------------------------------------------------------------------

lsi-mr3                        6.912.12.00-1OEM.600.0.0.2768847     Avago   VMwareCertified   2017-06-02

Thanks,

MS

We have a single ESXi 5.5U2 host and a pair of Synology NAS boxes set up as iSCSI LUNs and connected as datastores to the ESXi host. We'll be moving all of that to a new office that has a different IP scheme. My current plan is:

1 - Power off VMs, put host in maintenance mode and power it off.

2 - Change Synologys from Static IP to DHCP and power them off.

3 - In new office space power on Synologys and switch them from DHCP to static IP using the IP scheme of the new office

4 - Power on the ESXi hypervisor and change the IP to use the IP scheme of the new office.

5 - Log in to Vsphere Client and under properties of the iSCSI software adapter remove the old iSCSI server location IPs from Dynamic Discovery tab and add new ones.

Am I missing anything here or are there any potential problems I may run in to with the above plan? Will anything additional be required for the hypervisor to properly see the datastores after all those changes?

Thank you in advance for any help.

But i do not understand, how to see realtime vCPU-to-logicalCPU mapping for each VM?

The only way is to find this info in VMware.log of each virtual machine?

Hello msripada

thank you for your feedback.

Yes we are using a Lenovo ServeRAID M5210 (LSI) but with the ESXi-6.5 customized Lenovo version. So this should not be a problem, I guess?

Thank you and reagards

Luke

I, too, had the same or similar problem. A USR 5637 USB modem would not dial out, or otherwise respond to the guest OS after upgrading to ESXi 6.5. Querying the modem in device manager returned a message saying the modem was not responding. I reverted to the old driver on the host, and now the USB modem works fine inside the guest OS.

Please check the firmware and if any latest driver available as the lsi_mr3 is showing aborts which is not a good sign.

Thanks,

MS

Keep in mind that VDP is being discontinued after vSphere 6.5

See: https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/vsphere/vmw-vdp-eoa-faqs.pdf

Existing users can migrate to Dell's Avamar.

So as a general interest follow up question:

     What 3rd party backup solutions are people using?

/var/log # cat vmkernel.log | grep xhci

VMB: 212: name: /xhci_xhc.v00

2017-07-18T03:35:16.458Z cpu0:32768)VisorFSTar: 1960: xhci_xhc.v00 for 0x2a17f bytes

2017-07-18T03:35:23.556Z cpu0:33344)Loading module xhci ...

2017-07-18T03:35:23.557Z cpu0:33344)Elf: 1861: module xhci has license GPL

2017-07-18T03:35:23.557Z cpu0:33344)module heap vmklnx_xhci: creation succeeded. id = 0x410953fed000

2017-07-18T03:35:23.557Z cpu0:33344)PCI: driver xhci_hcd is looking for devices

2017-07-18T03:35:23.557Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:35:23.557Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

2017-07-18T03:35:23.558Z cpu0:33344)IRQ: 540: 0x31 <xhci_hcd:usb3> sharable, flags 0x10

2017-07-18T03:35:23.558Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000

2017-07-18T03:35:23.558Z cpu0:33344)IRQ: 540: 0x37 <xhci_hcd> exclusive, flags 0x10

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: Manufacturer: vmklinux_9 xhci_hcd

2017-07-18T03:35:23.558Z cpu0:33344)<7>xHCI xhci_add_endpoint called for root hub

2017-07-18T03:35:23.558Z cpu0:33344)<7>xHCI xhci_check_bandwidth called for root hub

2017-07-18T03:35:23.558Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:35:23.558Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: Manufacturer: vmklinux_9 xhci_hcd

2017-07-18T03:35:23.558Z cpu0:33344)<7>xHCI xhci_add_endpoint called for root hub

2017-07-18T03:35:23.558Z cpu0:33344)<7>xHCI xhci_check_bandwidth called for root hub

2017-07-18T03:35:23.558Z cpu0:33344)PCI: driver xhci_hcd claimed device 0000:00:14.0

2017-07-18T03:35:23.558Z cpu0:33344)PCI: driver xhci_hcd claimed 1 device

2017-07-18T03:35:23.558Z cpu0:33344)Mod: 4780: Initialization of xhci succeeded with module ID 4126.

2017-07-18T03:35:23.558Z cpu0:33344)xhci loaded successfully.

VMB: 212: name: /xhci_xhc.v00

2017-07-18T03:56:36.455Z cpu0:32768)VisorFSTar: 1960: xhci_xhc.v00 for 0x37d7f bytes

2017-07-18T03:56:43.463Z cpu6:33343)Loading module xhci ...

2017-07-18T03:56:43.463Z cpu6:33343)Elf: 1861: module xhci has license GPL

2017-07-18T03:56:43.464Z cpu6:33343)module heap vmklnx_xhci: creation succeeded. id = 0x41092d4fd000

2017-07-18T03:56:43.464Z cpu6:33343)PCI: driver xhci_hcd is looking for devices

2017-07-18T03:56:43.464Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:56:43.464Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

2017-07-18T03:56:43.464Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Resetting HCD

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Reset complete

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Enabling 64-bit DMA addresses.

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Calling HCD init

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Called HCD init

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Got SBRN 48

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Finished xhci_pci_reinit

2017-07-18T03:56:43.465Z cpu6:33343)IRQ: 540: 0x37 <xhci_hcd> exclusive, flags 0x10

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Command ring memory map follows:

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: ERST memory map follows:

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Event ring:

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: Manufacturer: vmklinux_9 xhci-hcd

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 0 status = 0x2a0

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 1 status = 0x2a0

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 2 status = 0x2a0

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 3 status = 0x2a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: Manufacturer: vmklinux_9 xhci-hcd

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 0 status = 0x802a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 1 status = 0x802a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 2 status = 0x802a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 3 status = 0x802a0

2017-07-18T03:56:43.466Z cpu6:33343)PCI: driver xhci_hcd claimed device 0000:00:14.0

2017-07-18T03:56:43.466Z cpu6:33343)PCI: driver xhci_hcd claimed 1 device

2017-07-18T03:56:43.466Z cpu6:33343)Mod: 4780: Initialization of xhci succeeded with module ID 4130.

2017-07-18T03:56:43.466Z cpu6:33343)xhci loaded successfully.

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 0 status = 0x2a0

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 1 status = 0x2a0

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 2 status = 0x2a0

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 3 status = 0x2a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0

2017-07-18T04:22:52.484Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: Port Status Change Event for port 8

2017-07-18T04:22:52.484Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: resume root hub

2017-07-18T04:22:52.484Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.

2017-07-18T04:22:52.504Z cpu0:33315)<6>xhci_hcd 0000:00:14.0: clear port connect change, actual port 3 status = 0x1203

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot 1 output ctx = 0xdac2e000 (dma)

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot 1 input ctx = 0xdac30000 (dma)

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Set slot id 1 dcbaa entry 0x41092be97008 to 0xdac2e000

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: set port reset, actual port 3 status = 0x1311

2017-07-18T04:22:52.615Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: Port Status Change Event for port 8

2017-07-18T04:22:52.615Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: clear port reset change, actual port 3 status = 0x81203

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Set root hub portnum to 8

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Set fake root hub portnum to 4

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: udev->tt = 0x0

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: udev->ttport = 0x0

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot ID 1 Input Context:

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot ID 1 Input Context:

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot ID 1 Output Context:

2017-07-18T04:22:52.736Z cpu5:33341)<6>usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: add ep 0x84, slot id 1, new drop flags = 0x0, new add flags = 0x200

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: add ep 0x1, slot id 1, new drop flags = 0x0, new add flags = 0x204

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4109320f3a10

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: New Input Control Context:

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Output context after successful config ep cmd:

2017-07-18T04:22:52.758Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 3 status = 0x1203

2017-07-18T04:22:52.876Z cpu0:33302)<6>xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.

/var/log # cat vmkernel.log | grep 0000:00:14.0:

2017-07-18T03:35:23.513Z cpu5:33343)<6> 0000:00:14.0: USB3.0 ports routing map: 0x0 (was x00)

2017-07-18T03:35:23.557Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:35:23.557Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

2017-07-18T03:35:23.558Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000

2017-07-18T03:35:23.558Z cpu0:33344)WARNING: LinPCI: LinuxPCI_EnableMSIX:886: 0000:00:14.0: Interrupt allocation failed with Failure

2017-07-18T03:35:23.558Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:35:23.558Z cpu0:33344)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

2017-07-18T03:56:42.904Z cpu5:33340)<6> 0000:00:14.0: USB 3.0 ports that are now enabled under xHCI: 0xf

2017-07-18T03:56:42.904Z cpu5:33340)<6> 0000:00:14.0: USB 2.0 ports that are now switched over to xHCI: 0xf

2017-07-18T03:56:43.464Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:56:43.464Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

2017-07-18T03:56:43.464Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Resetting HCD

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Reset complete

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Enabling 64-bit DMA addresses.

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Calling HCD init

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Called HCD init

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Got SBRN 48

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Finished xhci_pci_reinit

2017-07-18T03:56:43.465Z cpu6:33343)WARNING: LinPCI: LinuxPCI_EnableMSIX:886: 0000:00:14.0: Interrupt allocation failed with Failure

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Command ring memory map follows:

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: ERST memory map follows:

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: Event ring:

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 0 status = 0x2a0

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 1 status = 0x2a0

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 2 status = 0x2a0

2017-07-18T03:56:43.465Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 3 status = 0x2a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: xHCI Host Controller

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 0 status = 0x802a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 1 status = 0x802a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 2 status = 0x802a0

2017-07-18T03:56:43.466Z cpu6:33343)<6>xhci_hcd 0000:00:14.0: set port power, actual port 3 status = 0x802a0

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 0 status = 0x2a0

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 1 status = 0x2a0

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 2 status = 0x2a0

2017-07-18T03:56:43.566Z cpu1:33318)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 3 status = 0x2a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0

2017-07-18T03:56:46.520Z cpu4:33305)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0

2017-07-18T04:05:59.039Z cpu2:33310)<6>xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0

2017-07-18T04:22:52.484Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: Port Status Change Event for port 8

2017-07-18T04:22:52.484Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: resume root hub

2017-07-18T04:22:52.484Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.

2017-07-18T04:22:52.504Z cpu0:33315)<6>xhci_hcd 0000:00:14.0: clear port connect change, actual port 3 status = 0x1203

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot 1 output ctx = 0xdac2e000 (dma)

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot 1 input ctx = 0xdac30000 (dma)

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Set slot id 1 dcbaa entry 0x41092be97008 to 0xdac2e000

2017-07-18T04:22:52.615Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: set port reset, actual port 3 status = 0x1311

2017-07-18T04:22:52.615Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: Port Status Change Event for port 8

2017-07-18T04:22:52.615Z cpu6:35925)<6>xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: clear port reset change, actual port 3 status = 0x81203

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Set root hub portnum to 8

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Set fake root hub portnum to 4

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: udev->tt = 0x0

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: udev->ttport = 0x0

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot ID 1 Input Context:

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot ID 1 Input Context:

2017-07-18T04:22:52.736Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Slot ID 1 Output Context:

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu6:35930)<6>xhci_hcd 0000:00:14.0: Waiting for status stage event

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: add ep 0x84, slot id 1, new drop flags = 0x0, new add flags = 0x200

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: add ep 0x1, slot id 1, new drop flags = 0x0, new add flags = 0x204

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4109320f3a10

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: New Input Control Context:

2017-07-18T04:22:52.757Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: Output context after successful config ep cmd:

2017-07-18T04:22:52.758Z cpu5:33341)<6>xhci_hcd 0000:00:14.0: clear port warm(BH) reset change, actual port 3 status = 0x1203

2017-07-18T04:22:52.876Z cpu0:33302)<6>xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.

/var/log # cat vmkernel.log | grep usb

VMB: 212: name: /ohci_usb.v00

VMB: 212: name: /uhci_usb.v00

2017-07-18T03:35:16.455Z cpu0:32768)VisorFSTar: 1960: ohci_usb.v00 for 0xe894 bytes

2017-07-18T03:35:16.458Z cpu0:32768)VisorFSTar: 1960: uhci_usb.v00 for 0xe62b bytes

2017-07-18T03:35:23.413Z cpu4:33341)Loading module usb ...

2017-07-18T03:35:23.413Z cpu4:33341)Elf: 1861: module usb has license GPL

2017-07-18T03:35:23.415Z cpu4:33341)module heap vmklnx_usb: creation succeeded. id = 0x410933bde000

2017-07-18T03:35:23.470Z cpu0:33341)<6>usbcore: registered new interface driver usbfs

2017-07-18T03:35:23.470Z cpu0:33341)<6>usbcore: registered new interface driver hub

2017-07-18T03:35:23.471Z cpu0:33341)<6>usbcore: registered new device driver usb

2017-07-18T03:35:23.471Z cpu0:33341)Mod: 4780: Initialization of usb succeeded with module ID 4124.

2017-07-18T03:35:23.471Z cpu0:33341)usb loaded successfully.

2017-07-18T03:35:23.487Z cpu5:33343)IRQ: 540: 0x31 <ehci_hcd:usb1> sharable, flags 0x10

2017-07-18T03:35:23.513Z cpu5:33343)<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

2017-07-18T03:35:23.513Z cpu5:33343)<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:35:23.513Z cpu5:33343)<6>usb usb1: Product: EHCI Host Controller

2017-07-18T03:35:23.513Z cpu5:33343)<6>usb usb1: Manufacturer: vmklinux_9 ehci_hcd

2017-07-18T03:35:23.513Z cpu5:33343)<6>usb usb1: SerialNumber: 0000:00:1a.0

2017-07-18T03:35:23.513Z cpu5:33343)<6>usb usb1: device is not available for passthrough

2017-07-18T03:35:23.513Z cpu5:33343)<6>usb usb1: usbfs: registered usb0101

2017-07-18T03:35:23.517Z cpu5:33343)IRQ: 540: 0x34 <ehci_hcd:usb2> sharable, flags 0x10

2017-07-18T03:35:23.543Z cpu5:33343)<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

2017-07-18T03:35:23.543Z cpu5:33343)<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:35:23.543Z cpu5:33343)<6>usb usb2: Product: EHCI Host Controller

2017-07-18T03:35:23.543Z cpu5:33343)<6>usb usb2: Manufacturer: vmklinux_9 ehci_hcd

2017-07-18T03:35:23.543Z cpu5:33343)<6>usb usb2: SerialNumber: 0000:00:1d.0

2017-07-18T03:35:23.543Z cpu5:33343)<6>usb usb2: device is not available for passthrough

2017-07-18T03:35:23.543Z cpu5:33343)<6>usb usb2: usbfs: registered usb0201

2017-07-18T03:35:23.558Z cpu0:33344)IRQ: 540: 0x31 <xhci_hcd:usb3> sharable, flags 0x10

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: Product: xHCI Host Controller

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: Manufacturer: vmklinux_9 xhci_hcd

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: SerialNumber: 0000:00:14.0

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: device is not available for passthrough

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb3: usbfs: registered usb0301

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: Product: xHCI Host Controller

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: Manufacturer: vmklinux_9 xhci_hcd

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: SerialNumber: 0000:00:14.0

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: device is not available for passthrough

2017-07-18T03:35:23.558Z cpu0:33344)<6>usb usb4: usbfs: registered usb0401

2017-07-18T03:35:23.565Z cpu0:33345)<6>usbcore: registered new interface driver usbhid

2017-07-18T03:35:23.826Z cpu3:33361)Loading module usb-storage ...

2017-07-18T03:35:23.826Z cpu3:33361)Elf: 1861: module usb-storage has license GPL

2017-07-18T03:35:23.827Z cpu3:33361)module heap vmklnx_usb_storage: creation succeeded. id = 0x410955067000

2017-07-18T03:35:23.841Z cpu2:33342)<6>usb 1-1: new high speed USB device number 2 using ehci_hcd

2017-07-18T03:35:24.000Z cpu2:33342)<6>usb 1-1: New USB device found, idVendor=8087, idProduct=0024

2017-07-18T03:35:24.000Z cpu2:33342)<6>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

2017-07-18T03:35:24.002Z cpu1:33342)<6>usb 1-1: device is not available for passthrough

2017-07-18T03:35:24.002Z cpu1:33342)<6>usb 1-1: usbfs: registered usb0102

2017-07-18T03:35:24.125Z cpu2:33342)<6>usb 2-1: new high speed USB device number 2 using ehci_hcd

2017-07-18T03:35:24.285Z cpu2:33342)<6>usb 2-1: New USB device found, idVendor=8087, idProduct=0024

2017-07-18T03:35:24.285Z cpu2:33342)<6>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

2017-07-18T03:35:24.287Z cpu0:33342)<6>usb 2-1: device is not available for passthrough

2017-07-18T03:35:24.287Z cpu0:33342)<6>usb 2-1: usbfs: registered usb0202

2017-07-18T03:35:24.372Z cpu2:33342)<6>usb 1-1.2: new full speed USB device number 3 using ehci_hcd

2017-07-18T03:35:24.494Z cpu1:33342)<6>usb 1-1.2: New USB device found, idVendor=1997, idProduct=2433

2017-07-18T03:35:24.494Z cpu1:33342)<6>usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

2017-07-18T03:35:24.494Z cpu1:33342)<6>usb 1-1.2: Product: mini keyboard

2017-07-18T03:35:24.494Z cpu1:33342)<6>usb 1-1.2: Manufacturer:

2017-07-18T03:35:24.496Z cpu1:33342)<6>generic-usb 0003:1997:2433.0001: input: USB HID v1.01 Keyboard [ mini keyboard] on usb-0000:00:1a.0-1.2/input0

2017-07-18T03:35:24.496Z cpu1:33342)<6>usbhid 1-1.2:1.0: interface is claimed by usbhid

2017-07-18T03:35:24.496Z cpu1:33342)<6>usb 1-1.2: device is not available for passthrough

2017-07-18T03:35:24.498Z cpu1:33342)<6>generic-usb 0003:1997:2433.0002: input: USB HID v1.01 Mouse [ mini keyboard] on usb-0000:00:1a.0-1.2/input1

2017-07-18T03:35:24.498Z cpu1:33342)<6>usbhid 1-1.2:1.0: interface is claimed by usbhid

2017-07-18T03:35:24.498Z cpu1:33342)<6>usb 1-1.2: device is not available for passthrough

2017-07-18T03:35:24.498Z cpu1:33342)<6>usb 1-1.2: usbfs: registered usb0103

2017-07-18T03:35:24.498Z cpu1:33361)<6>usbcore: registered new interface driver usb-storage

2017-07-18T03:35:24.498Z cpu1:33361)Mod: 4780: Initialization of usb-storage succeeded with module ID 4139.

2017-07-18T03:35:24.498Z cpu1:33361)usb-storage loaded successfully.

2017-07-18T03:35:25.671Z cpu1:33320)<6>usb usb3: suspended

2017-07-18T03:35:26.543Z cpu4:33307)<6>usb 2-1: suspended

2017-07-18T03:35:26.729Z cpu0:33311)<6>usb usb4: suspended

2017-07-18T03:35:28.615Z cpu0:33320)<6>usb usb2: suspended

2017-07-18T03:37:53.702Z cpu7:33984)<6>usb passthrough enabled; all eligible devices will be unclaimed by kernel drivers

2017-07-18T03:55:58.066Z cpu2:38955)<6>usb passthrough disabled

VMB: 212: name: /ohci_usb.v00

VMB: 212: name: /uhci_usb.v00

2017-07-18T03:56:36.451Z cpu0:32768)VisorFSTar: 1960: ohci_usb.v00 for 0xe894 bytes

2017-07-18T03:56:36.454Z cpu0:32768)VisorFSTar: 1960: uhci_usb.v00 for 0xe62b bytes

2017-07-18T03:56:42.900Z cpu5:33340)Loading module usb ...

2017-07-18T03:56:42.900Z cpu5:33340)Elf: 1861: module usb has license GPL

2017-07-18T03:56:42.902Z cpu5:33340)module heap vmklnx_usb: creation succeeded. id = 0x4109320e4000

2017-07-18T03:56:43.078Z cpu5:33340)<6>usbcore: registered new interface driver usbfs

2017-07-18T03:56:43.078Z cpu5:33340)<6>usbcore: registered new interface driver hub

2017-07-18T03:56:43.079Z cpu5:33340)<6>usbcore: registered new device driver usb

2017-07-18T03:56:43.079Z cpu5:33340)Mod: 4780: Initialization of usb succeeded with module ID 4128.

2017-07-18T03:56:43.079Z cpu5:33340)usb loaded successfully.

2017-07-18T03:56:43.095Z cpu5:33342)IRQ: 540: 0x31 <ehci_hcd:usb1> sharable, flags 0x10

2017-07-18T03:56:43.425Z cpu5:33342)<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

2017-07-18T03:56:43.425Z cpu5:33342)<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:56:43.425Z cpu5:33342)<6>usb usb1: Product: EHCI Host Controller

2017-07-18T03:56:43.425Z cpu5:33342)<6>usb usb1: Manufacturer: vmklinux_9 ehci_hcd

2017-07-18T03:56:43.425Z cpu5:33342)<6>usb usb1: SerialNumber: 0000:00:1a.0

2017-07-18T03:56:43.425Z cpu5:33342)<6>usb usb1: device is not available for passthrough

2017-07-18T03:56:43.425Z cpu5:33342)<6>usb usb1: usbfs: registered usb0101

2017-07-18T03:56:43.429Z cpu5:33342)IRQ: 540: 0x34 <ehci_hcd:usb2> sharable, flags 0x10

2017-07-18T03:56:43.455Z cpu5:33342)<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

2017-07-18T03:56:43.455Z cpu5:33342)<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:56:43.455Z cpu5:33342)<6>usb usb2: Product: EHCI Host Controller

2017-07-18T03:56:43.455Z cpu5:33342)<6>usb usb2: Manufacturer: vmklinux_9 ehci_hcd

2017-07-18T03:56:43.455Z cpu5:33342)<6>usb usb2: SerialNumber: 0000:00:1d.0

2017-07-18T03:56:43.455Z cpu5:33342)<6>usb usb2: device is not available for passthrough

2017-07-18T03:56:43.455Z cpu5:33342)<6>usb usb2: usbfs: registered usb0201

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: Product: xHCI Host Controller

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: Manufacturer: vmklinux_9 xhci-hcd

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: SerialNumber: 0000:00:14.0

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: device is not available for passthrough

2017-07-18T03:56:43.465Z cpu6:33343)<6>usb usb3: usbfs: registered usb0301

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: Product: xHCI Host Controller

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: Manufacturer: vmklinux_9 xhci-hcd

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: SerialNumber: 0000:00:14.0

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: device is not available for passthrough

2017-07-18T03:56:43.466Z cpu6:33343)<6>usb usb4: usbfs: registered usb0401

2017-07-18T03:56:43.476Z cpu3:33344)<6>usbcore: registered new interface driver usbhid

2017-07-18T03:56:43.753Z cpu3:33341)<6>usb 1-1: new high speed USB device number 2 using ehci_hcd

2017-07-18T03:56:43.782Z cpu1:33360)Loading module usb-storage ...

2017-07-18T03:56:43.782Z cpu1:33360)Elf: 1861: module usb-storage has license GPL

2017-07-18T03:56:43.783Z cpu1:33360)module heap vmklnx_usb_storage: creation succeeded. id = 0x41092da4e000

2017-07-18T03:56:43.913Z cpu3:33341)<6>usb 1-1: New USB device found, idVendor=8087, idProduct=0024

2017-07-18T03:56:43.913Z cpu3:33341)<6>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

2017-07-18T03:56:43.914Z cpu3:33341)<6>usb 1-1: device is not available for passthrough

2017-07-18T03:56:43.914Z cpu3:33341)<6>usb 1-1: usbfs: registered usb0102

2017-07-18T03:56:44.037Z cpu3:33341)<6>usb 2-1: new high speed USB device number 2 using ehci_hcd

2017-07-18T03:56:44.197Z cpu3:33341)<6>usb 2-1: New USB device found, idVendor=8087, idProduct=0024

2017-07-18T03:56:44.197Z cpu3:33341)<6>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

2017-07-18T03:56:44.198Z cpu3:33341)<6>usb 2-1: device is not available for passthrough

2017-07-18T03:56:44.198Z cpu3:33341)<6>usb 2-1: usbfs: registered usb0202

2017-07-18T03:56:44.283Z cpu3:33341)<6>usb 1-1.2: new full speed USB device number 3 using ehci_hcd

2017-07-18T03:56:44.406Z cpu3:33341)<6>usb 1-1.2: New USB device found, idVendor=1997, idProduct=2433

2017-07-18T03:56:44.406Z cpu3:33341)<6>usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

2017-07-18T03:56:44.406Z cpu3:33341)<6>usb 1-1.2: Product: mini keyboard

2017-07-18T03:56:44.406Z cpu3:33341)<6>usb 1-1.2: Manufacturer:

2017-07-18T03:56:44.408Z cpu3:33341)<6>generic-usb 0003:1997:2433.0001: input: USB HID v1.01 Keyboard [ mini keyboard] on usb-0000:00:1a.0-1.2/input0

2017-07-18T03:56:44.408Z cpu3:33341)<6>usbhid 1-1.2:1.0: interface is claimed by usbhid

2017-07-18T03:56:44.408Z cpu3:33341)<6>usb 1-1.2: device is not available for passthrough

2017-07-18T03:56:44.410Z cpu3:33341)<6>generic-usb 0003:1997:2433.0002: input: USB HID v1.01 Mouse [ mini keyboard] on usb-0000:00:1a.0-1.2/input1

2017-07-18T03:56:44.410Z cpu3:33341)<6>usbhid 1-1.2:1.0: interface is claimed by usbhid

2017-07-18T03:56:44.410Z cpu3:33341)<6>usb 1-1.2: device is not available for passthrough

2017-07-18T03:56:44.410Z cpu3:33341)<6>usb 1-1.2: usbfs: registered usb0103

2017-07-18T03:56:44.410Z cpu1:33360)<6>usbcore: registered new interface driver usb-storage

2017-07-18T03:56:44.410Z cpu1:33360)Mod: 4780: Initialization of usb-storage succeeded with module ID 4143.

2017-07-18T03:56:44.410Z cpu1:33360)usb-storage loaded successfully.

2017-07-18T03:56:45.697Z cpu2:33317)<6>usb usb3: suspended

2017-07-18T03:56:46.520Z cpu4:33305)<6>usb usb4: suspended

2017-07-18T03:56:46.635Z cpu1:33307)<6>usb 2-1: suspended

2017-07-18T03:56:48.697Z cpu4:33306)<6>usb usb2: suspended

2017-07-18T03:57:01.614Z cpu0:33759)<6>usb passthrough enabled; all eligible devices will be unclaimed by kernel drivers

2017-07-18T04:05:56.565Z cpu2:36719)<6>usb usb2: resumed

2017-07-18T04:05:56.627Z cpu0:36719)<6>usb 2-1: resumed

2017-07-18T04:05:56.649Z cpu1:36719)<6>usb usb4: resumed

2017-07-18T04:05:56.670Z cpu2:36719)<6>usb usb3: resumed

2017-07-18T04:05:59.010Z cpu1:33309)<6>usb usb3: suspended

2017-07-18T04:05:59.039Z cpu2:33310)<6>usb usb4: suspended

2017-07-18T04:05:59.070Z cpu7:33314)<6>usb 2-1: suspended

2017-07-18T04:06:01.860Z cpu0:33307)<6>usb usb2: suspended

2017-07-18T04:22:52.504Z cpu0:33315)<6>usb usb4: resumed

2017-07-18T04:22:52.736Z cpu5:33341)<6>usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd

2017-07-18T04:22:52.757Z cpu5:33341)<6>usb 4-4: New USB device found, idVendor=067b, idProduct=2773

2017-07-18T04:22:52.757Z cpu5:33341)<6>usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

2017-07-18T04:22:52.757Z cpu5:33341)<6>usb 4-4: Product: ATAPI-6 Bridge Controller

2017-07-18T04:22:52.757Z cpu5:33341)<6>usb 4-4: Manufacturer: Prolific Technology Inc.

2017-07-18T04:22:52.757Z cpu5:33341)<6>usb 4-4: SerialNumber: 0123456789000000005

2017-07-18T04:22:52.757Z cpu5:33341)<6>usb 4-4: Vendor: 0x067b, Product: 0x2773, Revision: 0x0100

2017-07-18T04:22:52.757Z cpu5:33341)<6>usb 4-4: Interface Subclass: 0x06, Protocol: 0x50

2017-07-18T04:22:52.758Z cpu5:33341)WARNING: LinScsiLLD: scsi_add_host:573: vmkAdapter (usb-storage) sgMaxEntries rounded to 255. Reported size was 65535

2017-07-18T04:22:52.758Z cpu5:33341)<6>usb-storage 4-4:1.0: interface is claimed by usb-storage

2017-07-18T04:22:52.758Z cpu5:33341)<6>usb 4-4: device is not available for passthrough

2017-07-18T04:22:52.758Z cpu5:33341)<6>usb 4-4: usbfs: registered usb0402

2017-07-18T04:22:53.832Z cpu0:39412)usb-storage: detected SCSI revision number 0 on vmhba37

2017-07-18T04:22:53.832Z cpu0:39412)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba37

2017-07-18T04:22:53.832Z cpu0:39412)usb-storage: patching inquiry data to change removable media bit from 'off' to 'on' on vmhba37

2017-07-18T04:22:53.832Z cpu0:39412)usb-storage: setting peripheral qualifier to 'not connected' on vmhba37

2017-07-18T04:22:53.832Z cpu1:33305)<6>usb-storage 4-4:1.0: unclaiming vmhba37

2017-07-18T04:22:53.833Z cpu0:33305)<6>usb 4-4: device is available for passthrough

2017-07-18T04:29:22.733Z cpu4:40431)<6>usb usb2: resumed

2017-07-18T04:29:22.796Z cpu2:40431)<6>usb 2-1: resumed

2017-07-18T04:29:22.817Z cpu2:40431)<6>usb usb3: resumed

2017-07-18T04:29:25.078Z cpu3:33313)<6>usb usb3: suspended

2017-07-18T04:29:25.098Z cpu0:33303)<6>usb 2-1: suspended

2017-07-18T04:29:27.138Z cpu3:33315)<6>usb usb2: suspended

The device section in my esx.conf has only this:

/device/000:000:31.2/vmkname = "vmhba0"

/device/000:001:00.0/owner = "passthru"

/device/000:001:00.0/device = "1142"

/device/000:001:00.0/vendor = "1b21"

/device/000:000:25.0/vmkname = "vmnic0"

I also found this in the vmkernel.log:

2017-07-18T03:56:43.465Z cpu6:33343)WARNING: VMK_PCI: 705: device 0000:00:14.0 failed to allocate 8 MSIX interrupts

2017-07-18T03:56:43.465Z cpu6:33343)WARNING: LinPCI: LinuxPCI_EnableMSIX:886: 0000:00:14.0: Interrupt allocation failed with Failure

Добрый день всем!

Подскажите, пожалуйста, чтобы запустить ВМ с 1 сокетом, но на 16 ядер нужно приобретать Essential Kit ?

Сейчас система выдает ошибку при запуске ВМ Feature 'Virtual SMP' not licensed, requires 16 have 8

В разных обсуждениях, включая данный портал, пишут о том что базовая лицензия vmSphere которая получается после регистрации не накладывает никаких ограничений.

Поясните, пожалуйста, логику, докупать лицензии?

Спасибо!

Hello all

After registration on vm-site we have licence key - VMware vSphere Hypervisor 6 License

But when i tried start VM with one CPU and 16 cores per socket

Get  error -  Feature 'Virtual SMP' not licensed, requires 16 have 8

Question is wich type of licence we must have if we want start 2 VM with 1 cpu and more then 8 cores per socket?

Thanks!

Thank you for your feedback msripada

We use newer Driver and Firmware:

Firmware: Our System: 4.620.00-8080 / Compatibility Guide: 4.620.00-7178

Driver: Our System: 6.912.12.00-1OEM.600.0.0.2768847 / Compatibility Guide: 6.910.18.00-1vmw.650.0.0.4564106

Could this be a Problem?

We use the Driver from the Lenovo Customized ESXI Image: Download VMware vSphere

The informations from the link: Download VMware vSphere

VENDOR--PROVIDER/DRIVER--VERSION--CERTIFIED/Accepted

Avago--lsi-mr3--6.912.12.00-1OEM.600.0.0.2768847--Yes

So I guess the Driver should not be a Problem but maybe the newer Firmware?

For detailed Informations about the driver / firmware / Compatibility Guide:

The driver and firmware versions of our server:

vmkload_mod -s lsi_mr3 | grep -i Version

Version: 6.912.12.00-1OEM.600.0.0.2768847

/opt/lsi/storcli/storcli /c1 show | grep Version

BIOS Version = 6.30.03.2_4.17.08.00_0x06130201

FW Version = 4.620.00-8080

Driver Version = 6.912.12.00

And the Informations of the VMware Compatibility Guide:

Source: VMware Compatibility Guide - I/O Device Search

What is the USB device you are using. Is ESXI recognizing same device when you attatch it to PCI USB device you have installed !

Are you are looking for support of vSphere 6.5 U1 with any version of Vmware Horizon?

Hi,

The free version of vSphere ESXi(called vSphere Hypervisor{free}) has a limit on VSMP(limited to 8). There is no limit on any paid edition of vSphere.

Reference:

Product offerings for vSphere 6.0 (2109507) | VMware KB

Hope this helps!

Hi...

"Get  error -  Feature 'Virtual SMP' not licensed, requires 16 have 8"

You're using the free version... This has a limit of 8 vCPUs/cores per VM,

"Question is wich type of licence we must have if we want start 2 VM with 1 cpu and more then 8 cores per socket"

Any license will do except for the free one...

/Rubeck